Lunar phases in spacecraft images and measured earthshine
The lunar phases are changing views of the Moon's sunlit half. As the Moon moves around Earth, different portions of that illuminated hemisphere face us. At new Moon, the directly lit side faces away; at full Moon, it faces toward Earth. NASA's phase diagrams distinguish the visible shape from the physical globe: the Moon keeps a day side and a night side while its position changes. The familiar crescent is a viewing geometry, rather than a piece missing from the Moon.
The cycle takes about 29.5 days from one new Moon to the next, slightly longer than the Moon's approximately 27.3-day orbit. The sequence passes through waxing crescent, first quarter, waxing gibbous, full Moon, waning gibbous, third quarter, and waning crescent. At first quarter, half the disk looks illuminated and the Moon is about a quarter of the way through the cycle. It rises around midday and sets around midnight. Those timings connect lunar phases with the Moon's position relative to the Sun, explaining why a familiar half-lit Moon can be visible during daylight.
Earth's shadow requires a different alignment. A lunar eclipse occurs when Earth lies between the Sun and Moon and the Moon passes through that shadow. NASA distinguishes the dark central umbra from the fainter outer penumbra: a partial lunar eclipse enters only part of the umbra, while a penumbral eclipse may produce only subtle dimming. These are particular passages through Earth's shadow, rather than the cause of the ordinary lunar phases. The Moon's orbital plane is tilted about 5 degrees relative to Earth's orbit around the Sun, so the three bodies do not line up for eclipses every month. During a lunar eclipse, sunlight filtered through Earth's atmosphere can still reach the Moon and give it an orange or red appearance. That atmospheric filtering is separate from the changing portion of the normally sunlit hemisphere visible during a month.
A spacecraft supplied an unusually clear demonstration that the far side receives daylight. On 16 July 2015, NASA's Earth Polychromatic Imaging Camera, or EPIC, recorded the Moon crossing in front of the sunlit Earth. The instrument rode aboard the Deep Space Climate Observatory, about a million miles away between Earth and the Sun. Its sequence, taken from 3:50 p.m. to 8:45 p.m. Eastern Daylight Time, showed the illuminated lunar far side moving over the Pacific near North America. Tidal locking keeps that hemisphere turned away from Earth, but the camera's different position made it accessible.
The colors in that sequence also expose how the observation was assembled. EPIC combined separate red, green, and blue monochrome exposures taken roughly 30 seconds apart. The Moon moved between exposures, producing a thin green offset along its right edge and red and blue offsets on the left. NASA identified these as camera-combination effects. They are consequences of the instrument's timing and the Moon's movement, rather than colored bands belonging to the lunar surface. The same image sequence contains both real illumination and a recognizable imaging artifact.
The faintly visible remainder of a crescent has another measurable light source. In 2014, Peter Thejll and colleagues reported observations of earthshine using a small refracting telescope in Hawaii. Sunlight reflected by Earth illuminates the otherwise dark part of the Moon, which then sends some of that light back toward us. The researchers photographed both the bright and dark portions through blue and visual-band filters. Their method combined 100 rapidly acquired images to improve the signal relative to noise and used relative measurements to reduce sources of photometric bias.
They found the earthlit lunar surface to be bluer than the directly sunlit portion by 0.150 magnitudes in the blue-minus-visual color measurement, with an uncertainty of 0.005. The result agreed with an earlier measurement from 1967. It gave a quantitative distinction between two routes taken by sunlight: directly to the Moon, or first reflected from Earth. Earthshine therefore adds faint illumination within a crescent's darker area without changing the main sequence of lunar phases or requiring the Moon to generate visible light of its own.
Surface reflectivity adds a further distinction between dark terrain and lunar night. NASA's Moonlight material gives the Moon an overall reflected fraction, or albedo, of roughly one-tenth of incoming sunlight. Earth reflects about three-tenths. The lunar volcanic plains are darker because basalt reflects less light than the brighter highland rocks, including anorthosite. Those variations belong to the material itself. They are different from the monthly boundary between the portion illuminated by the Sun and the portion experiencing night, even when both kinds of darkness occupy the same view.
NASA's Lunar Reconnaissance Orbiter images separate those effects in finer detail. At Aristarchus Crater, streaks with higher and lower albedo reveal different exposed rock types. LRO data also underpin a visualization of changing light and shadow near lunar sunrise and sunset. One set of observations uses reflected brightness to investigate composition; the other follows illumination across rugged terrain. Together they show why an unchanging landscape can look markedly different as sunlight moves across it, while its underlying patterns of reflective and less reflective rock remain identifiable.
- NASA Science, Moon Phases — science.nasa.gov
- NASA Science, Eclipses and the Moon — science.nasa.gov
- NASA, From a Million Miles Away, NASA Camera Shows Moon Crossing Face of Earth, 5 August 2015 — www.nasa.gov
- Peter Thejll and colleagues, On the colour of the dark side of the Moon, 2014 — arxiv.org
- NASA Science, Moonlight: reflected light and Lunar Reconnaissance Orbiter observations — science.nasa.gov